★★★★★5.0 from 39 Google reviews Licensed & insured Veteran & firefighter owned Call or text 262-443-7218

HomeServices › Pier & Dock Cleaning

Pier & Dock Cleaning in Waukesha, WI

Aluminum, composite and wood, each one cleaned to what the material will take. Every dock is looked at in person before a number is given.

A dock never dries out

A dock sits over water all season. Spray comes up through the gaps, the underside stays damp every hour of the day, and the surface picks up the film that everything on a lake picks up. That is why a dock goes green faster than anything else on the property.

It is also the one surface people walk on barefoot and wet. A slick dock is a safety problem before it is an appearance problem, and it is the reason most of these calls come in.

How a dock clean runs

Four steps, adjusted to whatever the decking is made of.

1

Read the decking

Aluminum, composite, PVC or wood. Each one takes a different amount of pressure, and composite takes the least of all.

2

Clear and protect

Furniture, mats and anything loose comes off first. Plantings along the shoreline get soaked with plain water before anything else happens.

3

Solution, dwell, brush if needed

The solution does the work and gets time to sit. Anything it does not lift on its own gets brushed by hand. Pressure only as much as the decking will take.

4

Walk it together

Rinsed the length of the boards so there are no lap marks, then a walk-around at the end — or photos of everything if you could not be there.

Recent dock work

Same angle, same framing, no filters.

BEFOREAFTER
Aluminum decking · film and staining off
BEFOREAFTER
Painted dock post · algae streaking off the faces
BEFOREAFTER
Composite dock boards · low pressure, color layer intact

Drag any slider to see the difference

What people ask first

“Will it wreck my composite boards?”

It will if the pressure is wrong. Composite has a thin color layer over the core, and once that top layer is gone it does not come back — that is the one failure on this kind of decking there is no fixing. It gets solution, a brush where it needs one, and the gentlest approach that works.

“Is it worth it on aluminum?”

Aluminum takes a film that dulls the whole surface and holds grit in the ribs. It comes off, and the decking underneath is usually in better shape than people expect.

“What about the lake?”

Over open water we use a hydrogen peroxide solution certified under EPA’s Safer Choice program in its direct release category — the standard written for products used outdoors where the rinse reaches water without passing through treatment. Plantings along the shore still get soaked with plain water first.

What customers said

Read all 39 reviews on Google
★★★★★

Brad did an awesome job on my old, very dirty, moldy, mossy retaining wall. He even took extra care to protect my plants and bushes. Courteous, efficient, prompt, an excellent communicator.

Jackie LangenkampWaukesha
★★★★★

He laid out all the options and services available to me, but I never felt like there was a heavy hand directing me to the most expensive route. The quality was exactly what I was hoping for.

Kaitlyn KasperNew Berlin
★★★★★

Very professional and thorough. Attention to detail was very evident and I would absolutely recommend Pristine.

Anne SteflBrookfield

What a dock is up against

It sits over water all season

Spray comes up through the gaps and the underside never dries. A dock is damp around the clock in a way nothing else on the property is.

Lake film builds on everything

Whatever is in the water ends up on the decking — algae, pollen and a general film that dulls the surface and settles into the ribs and the grain.

Geese and gulls find it

A dock is the most attractive perch on the shoreline. What gets left behind stains, and on a hot day it bakes on within hours.

Wet and slick is the real risk

Algae film on a wet dock is slippery in a way a dry one never hints at. This is the surface people walk barefoot, carrying things, often not looking down.

Before you book

Will pressure washing ruin composite dock boards?

It will if the pressure is wrong. Composite has a thin color layer over the core, and too much pressure takes it off for good — there is no sanding or recoating that back across a whole dock. Solution does the work here, brushed by hand where it needs it, with only as much pressure as the boards will take.

Can you clean aluminum decking?

Yes, and it is the most common dock decking on these lakes. Aluminum picks up a film that dulls the finish and traps grit down in the ribs. It comes off without much force, which is the point — aluminum does not need pressure, it needs dwell time, a brush where the ribs hold grit, and a proper rinse.

When in the season should a dock be cleaned?

The season runs from the end of April through the end of October, the same as everything else we do. For a dock the target worth aiming at is having it done before the boats go in, so you start May on a clean one rather than working around it. Spring and early summer are the busiest stretch of the year, so earlier calls get more choice of date.

How do I get a price?

Every job is looked at in person before a number is given. No phone quotes. What changes a price is the degree and type of growth, the complexity of the surface, and the distance to travel.

Related

Get a free estimate

Send this over and Brad will get back to you, usually within a few hours. Every deck is looked at in person before a price is given — no phone quotes.

CALL OR TEXT262-443-7218
HOURS

Monday–Friday 8:00–5:00Saturday 9:00–4:00 · Closed Sunday and holidays

Call 262-443-7218 Free Estimate